Short Shaft Pump
The original Yardmaster® Effluent Pump is a hi speed irrigation pump, ideal for green water with solids and floating frame applications.
|Non-clog impeller partially macerates soft materials so that solids will not pass into the line and cause blockages. The Yardmaster will also pump solids such as sand and gravel, is self-priming and can run dry.|
|Deflecting shaft can move up to 1/2" either side of the centre which allows the impeller to "walk" over obstacles until cleared.|
|The smaller model Yardmasters have a by-pass that agitates the liquid and solids around the pump head so that the solids are continually taken up with liquid. This by-pass also functions as a secondary inlet whilst the impeller cuts away the lumps which may temporarily have obstructed the main flow. Fluid velocity in the line is maintained.|
|The Heavy Duty bearings sit above the liquid level. This feature makes them trouble free and long wearing.|
|The motor is supplied mounted on top of the pump, away from any moisture or obstruction. No special fittings or guards are needed. Pumps can be provided for belt driven, hydraulic, air, petrol and diesel power drive.|
|Designed and manufactured in New Zealand for New Zealand conditions|
It is of vital importance that the support provided for Williams Engineering products is of the same quality and professionalism as that of their manufactured products. Technical support is available through our nationwide dealer network or contact Williams Engineering direct.
Williams Engineering warrants new products sold by it to be free from defects in material and workmanship for a period of twelve months after delivery to the initial user. This warranty is for the replacement or repair of any part found to be defective during the warranty period. This warranty excludes any transport costs incurred by Williams Engineering in giving effect to the warranty and specifically excludes all normal maintenance costs. Replacement parts provided under the terms of this warranty are covered for the remainder of the warranty period applicable to the product in which they are installed as if such parts were original components of that product.
Warranty only applies if the form at the rear of the product manual is completed and returned.